[I18N] Update translation terms from Transifex

locale/zh_CN/LC_MESSAGES/manufacturing.po

@@ -1,16 +1,16 @@
 # SOME DESCRIPTIVE TITLE.
 # Copyright (C) 2015-TODAY, Odoo S.A.
-# This file is distributed under the same license as the Odoo Business package.
+# This file is distributed under the same license as the Odoo package.
 # FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
 # 
 #, fuzzy
 msgid ""
 msgstr ""
-"Project-Id-Version: Odoo Business 10.0\n"
+"Project-Id-Version: Odoo 11.0\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2017-12-22 15:27+0100\n"
+"POT-Creation-Date: 2018-10-19 10:03+0200\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: Gary Wei <Gary.wei@elico-corp.com>, 2017\n"
+"Last-Translator: Shane Tsoi <sso@odoo.com>, 2018\n"
 "Language-Team: Chinese (China) (https://www.transifex.com/odoo/teams/41243/zh_CN/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -51,13 +51,10 @@ msgstr "设置基本的BoM"
 #: ../../manufacturing/management/bill_configuration.rst:16
 msgid ""
 "If you choose to manage your manufacturing operations using manufacturing "
-"orders only, you will define basic bills of materials without routings. For "
-"more information about which method of management to use, review the "
-"**Getting Started** section of the *Manufacturing* chapter of the "
-"documentation."
-msgstr "如你只用制造订单来管理制造过程，可无需路由来定义基本的物料清单。关于所采用的管理方式详情，请查看文献中*制造*章节的**开始**节。"
+"orders only, you will define basic bills of materials without routings."
+msgstr ""
 
-#: ../../manufacturing/management/bill_configuration.rst:22
+#: ../../manufacturing/management/bill_configuration.rst:19
 msgid ""
 "Before creating your first bill of materials, you will need to create a "
 "product and at least one component (components are considered products in "
@@ -72,7 +69,7 @@ msgstr ""
 "创建你的第一份物料清单前，你需要创建至少一个部件（在Odoo中也被认为是产品），方法是从 "
 ":menuselection:`主数据->产品，中选择或在系统运行时从BoM表格的相关字段中选择。一旦创建好一个产品和至少一个部件后，从相关的下拉菜单中选择它们并添加到你的物料清单。新的物料单可从menuselection中创建，选择主数据->物料清单，或使用产品表单之上的按钮进行创建。"
 
-#: ../../manufacturing/management/bill_configuration.rst:32
+#: ../../manufacturing/management/bill_configuration.rst:29
 msgid ""
 "Under the **Miscellaneous** tab, you can fill additional fields. "
 "**Sequence** defines the order in which your BoMs will be selected for "
@@ -81,11 +78,11 @@ msgid ""
 msgstr ""
 "在**杂项**页签下填写额外的字段。**顺序**定义了BoM被选择为生产订单的顺序，数字越小优先级越高。**版本**允许你跟踪BoM在不同时间的版本号变化。"
 
-#: ../../manufacturing/management/bill_configuration.rst:38
+#: ../../manufacturing/management/bill_configuration.rst:35
 msgid "Adding a Routing to a BoM"
 msgstr "在BoM中添加路由"
 
-#: ../../manufacturing/management/bill_configuration.rst:40
+#: ../../manufacturing/management/bill_configuration.rst:37
 msgid ""
 "A routing defines a series of operations required to manufacture a product "
 "and the work center at which each operation is performed. A routing may be "
@@ -94,14 +91,14 @@ msgid ""
 msgstr ""
 "路由定义制造一个产品所需的一系列操作，以及每个操作执行的工作中心。一个路由可以添加到多个BoM中，而后者每个只能有一个路由。路由配置的更多信息，请参阅路由一章。"
 
-#: ../../manufacturing/management/bill_configuration.rst:46
+#: ../../manufacturing/management/bill_configuration.rst:43
 msgid ""
 "After enabling routings from :menuselection:`Configuration --> Settings`, "
 "you will be able to add a routing to a bill of materials by selecting a "
 "routing from the dropdown list or creating one on the fly."
 msgstr "启用路由的方法 :menuselection:`配置 -->设置，然后当系统运行时从下拉清单中选择一个路由，即可将路由添加到物料清单。"
 
-#: ../../manufacturing/management/bill_configuration.rst:50
+#: ../../manufacturing/management/bill_configuration.rst:47
 msgid ""
 "You may define the work operation or step in which each component is "
 "consumed using the field, **Consumed in Operation** under the **Components**"
@@ -112,23 +109,23 @@ msgid ""
 msgstr ""
 "通过**组件**下方的**在工序中消费**字段定义工序或步骤。同样，也可以用**在操作中生产**字段（位于**杂项**页签下）定义产品被生产的操作。如果不填这个字段，产品将在路由的最后操作中被消耗/生产。"
 
-#: ../../manufacturing/management/bill_configuration.rst:61
+#: ../../manufacturing/management/bill_configuration.rst:58
 msgid "Adding Byproducts to a BoM"
 msgstr "添加副产品到BoM"
 
-#: ../../manufacturing/management/bill_configuration.rst:63
+#: ../../manufacturing/management/bill_configuration.rst:60
 msgid ""
 "In Odoo, a byproduct is any product produced by a BoM in addition to the "
 "primary product."
 msgstr "副产品指在Odoo中，BoM生产的任何主产品之外的产品。"
 
-#: ../../manufacturing/management/bill_configuration.rst:66
+#: ../../manufacturing/management/bill_configuration.rst:63
 msgid ""
 "To add byproducts to a BoM, you will first need to enable them from "
 ":menuselection:`Configuration --> Settings`."
 msgstr "如需将副产品添加到BoM，首先要在 :menuselection:`配置->设置，中选择启用它们。"
 
-#: ../../manufacturing/management/bill_configuration.rst:72
+#: ../../manufacturing/management/bill_configuration.rst:69
 msgid ""
 "Once byproducts are enabled, you can add them to your bills of materials "
 "under the **Byproducts** tab of the bill of materials. You can add any "
@@ -137,11 +134,11 @@ msgid ""
 msgstr ""
 "副产品启用后，即可被添加到物料清单**副产品**页签下的物料清单了。你可将任何产品（一个或多个）作为副产品添加。副产品的生产过程与BoM中主产品的路由一致。"
 
-#: ../../manufacturing/management/bill_configuration.rst:81
+#: ../../manufacturing/management/bill_configuration.rst:78
 msgid "Setting up a BoM for a Product With Sub-Assemblies"
 msgstr "为产品设置一个带分组件的BoM"
 
-#: ../../manufacturing/management/bill_configuration.rst:83
+#: ../../manufacturing/management/bill_configuration.rst:80
 #: ../../manufacturing/management/sub_assemblies.rst:5
 msgid ""
 "A subassembly is a manufactured product which is intended to be used as a "
@@ -152,7 +149,7 @@ msgid ""
 msgstr ""
 "分组件是一种用于另一制成品部件的制成品。你可能想用分组件来简化一个复杂的BoM、更精确地表示你的制造流，或在多个BoM中使用相同的分组件。BoM使用分组件通常指多级BoM。"
 
-#: ../../manufacturing/management/bill_configuration.rst:90
+#: ../../manufacturing/management/bill_configuration.rst:87
 #: ../../manufacturing/management/sub_assemblies.rst:12
 msgid ""
 "Multi-level bills of materials in Odoo are accomplished by creating a top-"
@@ -163,11 +160,11 @@ msgid ""
 msgstr ""
 "Odoo中的多级物料清单可通过创建顶级BoM和分组件BoM完成。下一步定义分组件产品的采购路线，以确保每次创建了顶级产品的制造订单时，能同时创建每个分组件的制造订单。"
 
-#: ../../manufacturing/management/bill_configuration.rst:97
+#: ../../manufacturing/management/bill_configuration.rst:94
 msgid "Configure the Top-Level Product BoM"
 msgstr "配置顶级产品BoM"
 
-#: ../../manufacturing/management/bill_configuration.rst:99
+#: ../../manufacturing/management/bill_configuration.rst:96
 #: ../../manufacturing/management/sub_assemblies.rst:21
 msgid ""
 "To configure a multi-level BoM, create the top-level product and its BoM. "
@@ -175,12 +172,12 @@ msgid ""
 "subassembly as you would for any product."
 msgstr "为配置多级BoM，请创建顶极产品及其BoM。将所有分组件包括到部件清单中。为每个分组件创建一个BoM（类似为每个产品创建BoM）。"
 
-#: ../../manufacturing/management/bill_configuration.rst:107
+#: ../../manufacturing/management/bill_configuration.rst:104
 #: ../../manufacturing/management/sub_assemblies.rst:29
 msgid "Configure the Subassembly Product Data"
 msgstr "配置分组件产品数据"
 
-#: ../../manufacturing/management/bill_configuration.rst:109
+#: ../../manufacturing/management/bill_configuration.rst:106
 #: ../../manufacturing/management/sub_assemblies.rst:31
 msgid ""
 "On the product form of the subassembly, you must select the routes "
@@ -189,7 +186,7 @@ msgid ""
 "effect."
 msgstr "在分组件的产品表中，必须选择**制造**和**按需补货**路由。**制造**路由的优先级高于**购买**路由，因此选后者是无效的。"
 
-#: ../../manufacturing/management/bill_configuration.rst:117
+#: ../../manufacturing/management/bill_configuration.rst:114
 #: ../../manufacturing/management/sub_assemblies.rst:39
 msgid ""
 "If you would like to be able to purchase the subassembly in addition to "
@@ -197,11 +194,11 @@ msgid ""
 "subassembly product form may be configured according to your preference."
 msgstr "如需在制造之外采购一些组件，选择**可以购买**。分组件产品表单中的所有其他字段都可根据你的偏好配置。"
 
-#: ../../manufacturing/management/bill_configuration.rst:123
+#: ../../manufacturing/management/bill_configuration.rst:120
 msgid "Using a Single BoM to Describe Several Variants of a Single Product"
 msgstr "使用单个的BoM描述单一产品的多个变体"
 
-#: ../../manufacturing/management/bill_configuration.rst:125
+#: ../../manufacturing/management/bill_configuration.rst:122
 #: ../../manufacturing/management/product_variants.rst:5
 msgid ""
 "Odoo allows you to use one bill of materials for multiple variants of the "
@@ -209,7 +206,7 @@ msgid ""
 "Settings`."
 msgstr "Odoo允许你为同一产品的多个变量使用物料清单。启用变量的方式很简单，只需从 :menuselection:`配置->设置中选择。"
 
-#: ../../manufacturing/management/bill_configuration.rst:132
+#: ../../manufacturing/management/bill_configuration.rst:129
 #: ../../manufacturing/management/product_variants.rst:12
 msgid ""
 "You will then be able to specify which component lines are to be used in the"
@@ -218,7 +215,7 @@ msgid ""
 "variants."
 msgstr "然后就可以指定每个产品变量的制造中需要用哪些部件行。可以为每个行指定多个变量。如果没有指定变量，这一行可以用于所有的变量。"
 
-#: ../../manufacturing/management/bill_configuration.rst:137
+#: ../../manufacturing/management/bill_configuration.rst:134
 #: ../../manufacturing/management/product_variants.rst:17
 msgid ""
 "When defining variant BoMs on a line-item-basis, the **Product Variant** "
@@ -429,6 +426,112 @@ msgstr "如何管理半成品。"
 msgid "Configure the Top -Level Product BoM"
 msgstr "配置顶级产品BoM"
 
+#: ../../manufacturing/management/unbuild.rst:3
+msgid "Unbuild a product"
+msgstr ""
+
+#: ../../manufacturing/management/unbuild.rst:5
+msgid ""
+"In Odoo Manufacturing App, you can *Unbuild* products. Two use cases can be "
+"managed: (1) you can unbuild products you have built yourself or (2) you can"
+" unbuild products you have received."
+msgstr ""
+
+#: ../../manufacturing/management/unbuild.rst:9
+msgid ""
+"Let's take the first case, you are manufacturing products yourself. If one "
+"of your product presents some defect, you might want to unbuild it instead "
+"of scrapping it completely, allowing you to reuse some components of the "
+"product."
+msgstr ""
+
+#: ../../manufacturing/management/unbuild.rst:14
+msgid ""
+"In the second case, you are buying products for the sole purpose of "
+"unbuilding them and recycling them."
+msgstr ""
+
+#: ../../manufacturing/management/unbuild.rst:18
+msgid "Unbuild Order"
+msgstr "拆解单"
+
+#: ../../manufacturing/management/unbuild.rst:20
+msgid ""
+"While in the Manufacturing App, under the *Operations* tab you will find the"
+" menu *Unbuild Orders*."
+msgstr ""
+
+#: ../../manufacturing/management/unbuild.rst:26
+msgid ""
+"When creating a new one, you can either select a MO if you are unbuilding "
+"something you manufactured or only select a product if you are unbuilding "
+"something you received."
+msgstr ""
+
+#: ../../manufacturing/management/unbuild.rst:33
+msgid "When you are done, just click unbuild and the process will be over."
+msgstr ""
+
+#: ../../manufacturing/management/unbuild.rst:35
+msgid ""
+"If you unbuild a product that you manufactured before, you will get the "
+"components from the MO back in stock."
+msgstr ""
+
+#: ../../manufacturing/management/unbuild.rst:38
+msgid ""
+"If you unbuild a product you bought, you will get the components from the "
+"BoM back in stock."
+msgstr ""
+
 #: ../../manufacturing/overview.rst:5
 msgid "Overview"
-msgstr "概述"
+msgstr "概览"
+
+#: ../../manufacturing/repair.rst:5
+msgid "Repair Management"
+msgstr ""
+
+#: ../../manufacturing/repair/repair.rst:3
+msgid "Repair products"
+msgstr ""
+
+#: ../../manufacturing/repair/repair.rst:5
+msgid ""
+"The Odoo *Repair* app allows you to manage a complete after sales process "
+"but also to simply repair products you have manufactured, if they present a "
+"defect."
+msgstr ""
+
+#: ../../manufacturing/repair/repair.rst:10
+msgid "Create a Repair Order"
+msgstr ""
+
+#: ../../manufacturing/repair/repair.rst:12
+msgid ""
+"Once in the app, you can access your existing *Repair Orders* and create a "
+"new one."
+msgstr ""
+
+#: ../../manufacturing/repair/repair.rst:19
+msgid "Manage a repair"
+msgstr ""
+
+#: ../../manufacturing/repair/repair.rst:21
+msgid ""
+"When a customer sends you a product for repair, create a new *Repair Order*."
+" Fill it in with all the information you may need such as the product, the "
+"customer, if it has to be invoiced after or before the repair, the parts you"
+" might need, etc."
+msgstr ""
+
+#: ../../manufacturing/repair/repair.rst:29
+msgid ""
+"Once everything is done, you can then send the repair quotation to your "
+"customer. If it is approved, you can confirm the repair. You will then be "
+"able to start & end the repair when it is completed."
+msgstr ""
+
+#: ../../manufacturing/repair/repair.rst:36
+msgid "You can now invoice the repair."
+msgstr ""