NextERP/documentation
5
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

[I18N] Export 14.0 source terms

Browse Source
This commit is contained in:
Martin Trigaux
2020-11-02 12:07:59 +01:00
parent 27175c3685
commit 97ece83b34
9 changed files with 453 additions and 828 deletions
Download Patch File Download Diff File Expand all files Collapse all files
locale/sources/iot.pot
+182 -206
View File
@@ -6,9 +6,9 @@
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: Odoo 13.0\n"
"Project-Id-Version: Odoo 14.0\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-09-22 16:26+0200\n"
"POT-Creation-Date: 2020-11-02 12:05+0100\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
@@ -109,47 +109,27 @@ msgid "In some case, you may need to reflash your IoT Box’s SD Card to benefit
msgstr ""
#: ../../iot/config/flash_sdcard.rst:9
msgid "Updating your SD Card with Etcher"
msgid "Upgrade from the IoT Box homepage"
msgstr ""
#: ../../iot/config/flash_sdcard.rst:11
msgid "Go to Balena’s website and download `Etcher <https://www.balena.io/>`__, It’s a free and open-source utility used for burning image files. Install and launch it."
msgid "Go to the IoT Box homepage, click on *Update*, next to the version number. If a new version of the IoT Box image is available, you will see a *Upgrade to ___* button a the bottom of the page, the IoT Box will then flash itself to the new version of the IoT Box. All of your configurations will be saved."
msgstr ""
#: ../../iot/config/flash_sdcard.rst:15
msgid "Now, download the latest image `here <http://nightly.odoo.com/master/posbox/iotbox/>`__, and extract it from the zip file. Then, open *Etcher* and select the image. Select the drive to flash (where your SD Card is) and click on *Flash*!."
#: ../../iot/config/flash_sdcard.rst:18
msgid "This process can take more than 30 minutes. Do not turn off or unplug the IoT Box as it would leave it in an inconsistent state."
msgstr ""
#: ../../iot/config/flash_sdcard.rst:19
msgid "Now, your image will be automatically updated. You just have to wait 5 minutes for it to finish."
#: ../../iot/config/flash_sdcard.rst:25
msgid "Upgrade with Etcher"
msgstr ""
#: ../../iot/config/iot_notfound.rst:3
msgid "IoT Box not found"
#: ../../iot/config/flash_sdcard.rst:27
msgid "Go to Balena’s website and download `Etcher <https://www.balena.io/>`__. It’s a free and open-source utility used for burning image files. Install and launch it. Download the latest image from `nightly <http://nightly.odoo.com/master/iotbox/>`__."
msgstr ""
#: ../../iot/config/iot_notfound.rst:5
msgid "When using your IoT Box, a common issue you might encounter is that your box is not found on your database. Fortunately, there are a few easy steps you can follow to find your IoT box."
msgstr ""
#: ../../iot/config/iot_notfound.rst:10
msgid "HTTPS Issues"
msgstr ""
#: ../../iot/config/iot_notfound.rst:12
msgid "Your IoT Box is not found? You probably have https issues!"
msgstr ""
#: ../../iot/config/iot_notfound.rst:14
msgid "To check it, go to your database and verify if your database address starts with an https (like https://www.odoo.com). If this is the case, then you may have problems with your IoT Box image. It should be version 18.12 or later."
msgstr ""
#: ../../iot/config/iot_notfound.rst:19
msgid "If your IoT Box image is from an earlier version, then you will have to reflash the SD card of your IoT Box to update the image (the latest image can be found `here <http://nightly.odoo.com/master/posbox/iotbox/>`__)."
msgstr ""
#: ../../iot/config/iot_notfound.rst:24
msgid ":doc:`flash_sdcard`"
#: ../../iot/config/flash_sdcard.rst:32
msgid "Then, open *Etcher* and select *Flash from file*, find the image you just downloaded. Insert the IoT Box SD card into your computer and select it. Click on *Flash* and wait for the process to finish."
msgstr ""
#: ../../iot/config/pos.rst:3
@@ -165,183 +145,211 @@ msgid "Before starting, make sure you have the following:"
msgstr ""
#: ../../iot/config/pos.rst:13
msgid "An IoT Box"
msgid "An IoT Box, with its power adapter."
msgstr ""
#: ../../iot/config/pos.rst:15
msgid "A 2A Power adapter with pi 3 b+ 2.5 A"
msgstr ""
#: ../../iot/config/pos.rst:17
msgid "A computer or tablet with an up-to-date web browser"
msgstr ""
#: ../../iot/config/pos.rst:19
#: ../../iot/config/pos.rst:17
msgid "A running SaaS or Odoo instance with the Point of Sale and IoT apps installed"
msgstr ""
#: ../../iot/config/pos.rst:22
#: ../../iot/config/pos.rst:20
msgid "A local network setup with DHCP (this is the default setting)"
msgstr ""
#: ../../iot/config/pos.rst:24
msgid "An Epson USB TM-T20 Printer or another ESC/POS compatible printer (officially supported printers are listed at the `POS Hardware page <https://www.odoo.com/page/pos-ipad-android-hardware>`__)"
msgstr ""
#: ../../iot/config/pos.rst:28
msgid "A Honeywell Eclipse USB Barcode Scanner or another compatible scanner"
msgstr ""
#: ../../iot/config/pos.rst:30
msgid "An Epson compatible cash drawer"
msgstr ""
#: ../../iot/config/pos.rst:32
#: ../../iot/config/pos.rst:22
msgid "An RJ45 Ethernet Cable (optional, WiFi is built in)"
msgstr ""
#: ../../iot/config/pos.rst:35
#: ../../iot/config/pos.rst:24
msgid "Any of the supported hardware (receipt printer, barcode scanner, cash drawer, payment terminal, scale, customer display, etc.). The list of supported hardware can be found on the `POS Hardware page <https://www.odoo.com/page/point-of-sale-hardware>`__"
msgstr ""
#: ../../iot/config/pos.rst:30
msgid "Set Up"
msgstr ""
#: ../../iot/config/pos.rst:37
#: ../../iot/config/pos.rst:32
msgid "To connect hardware to the PoS, the first step is to connect an IoT Box to your database. For this, follow this :doc:`documentation <connect>`."
msgstr ""
#: ../../iot/config/pos.rst:44
#: ../../iot/config/pos.rst:36
msgid "Then, you have to connect the peripheral devices to your IoT Box."
msgstr ""
#: ../../iot/config/pos.rst:46
msgid "Officially supported hardware is listed on `the POS Hardware page <https://www.odoo.com/page/pos-ipad-android-hardware>`__, but other hardware might work as well."
#: ../../iot/config/pos.rst:38
msgid "**Printer**: Connect a supported receipt printer to a USB port or to the network and power it on."
msgstr ""
#: ../../iot/config/pos.rst:50
msgid "**Printer**: Connect an ESC/POS printer to a USB port and power it on."
msgstr ""
#: ../../iot/config/pos.rst:53
#: ../../iot/config/pos.rst:41
msgid "**Cash drawer**: The cash drawer should be connected to the printer with an RJ25 cable."
msgstr ""
#: ../../iot/config/pos.rst:56
msgid "**Barcode scanner**: Connect your barcode scanner. In order for your barcode scanner to be compatible it must behave as a keyboard and must be configured in **US QWERTY**. It also must end barcodes with an Enter character (keycode 28). This is most likely the default configuration of your barcode scanner."
#: ../../iot/config/pos.rst:44
msgid "**Barcode scanner**: Connect your barcode scanner. In order for your barcode scanner to be compatible it must end barcodes with an Enter character (keycode 28). This is most likely the default configuration of your barcode scanner."
msgstr ""
#: ../../iot/config/pos.rst:62
#: ../../iot/config/pos.rst:49
msgid "**Scale**: Connect your scale and power it on."
msgstr ""
#: ../../iot/config/pos.rst:64
msgid "**Ethernet**: If you do not wish to use Wi-Fi, plug in the Ethernet cable. Make sure this will connect the IoT Box to the same network as your POS device."
#: ../../iot/config/pos.rst:51
msgid "**Customer Display**: Connect a monitor to the IoT Box using an HDMI cable. You can also access the Customer Display from any other computer by accessing the IoT Box homepage and clicking on the *POS Display* button."
msgstr ""
#: ../../iot/config/pos.rst:56
msgid "**Payment terminal**: The connection process depends on the terminal, please refer to the :doc:`payment terminals documentation <../../point_of_sale/payment>`."
msgstr ""
#: ../../iot/config/pos.rst:60
msgid "Once it's done, you can connect the IoT Box to your PoS. For this, go in :menuselection:`Point of Sale --> Configuration --> PoS`, tick *IoT Box* and select the devices you want to use in this Point of Sale. Save the changes."
msgstr ""
#: ../../iot/config/pos.rst:68
msgid "**Wi-Fi**: The current version of the IoT Box has Wi-Fi built in. Make sure not to plug in an Ethernet cable when booting, because all Wi-Fi functionality will be bypassed when a wired network connection is available on boot."
msgstr ""
#: ../../iot/config/pos.rst:73
msgid "Once it's done, you can connect the IoT Box to your PoS. For this, go in :menuselection:`Point of Sale --> Configuration --> PoS`, tick the box \"IoT Box\" and select the IoT Box you want to connect with. Save the changes."
msgstr ""
#: ../../iot/config/pos.rst:77
msgid "Set up is done, you can launch a new PoS Session."
msgstr ""
#: ../../iot/config/pos.rst:80
msgid "Troubleshoot"
#: ../../iot/config/troubleshooting.rst:3
msgid "Troubleshooting"
msgstr ""
#: ../../iot/config/pos.rst:83
msgid "The PoS cannot connect to the IoT Box"
#: ../../iot/config/troubleshooting.rst:6
msgid "IoT Box Connection"
msgstr ""
#: ../../iot/config/pos.rst:85
msgid "The easiest way to make sure the IoT Box is properly set-up is to turn it on with the printer plugged in as it will print a receipt indicating any error if encountered or the IoT Box's IP address in case of success. If no receipt is printed, check the following steps:"
#: ../../iot/config/troubleshooting.rst:9
msgid "I can't find the pairing code to connect my IoT Box"
msgstr ""
#: ../../iot/config/pos.rst:91
msgid "Make sure the IoT Box is powered on, indicated by a brightly lit red status LED."
#: ../../iot/config/troubleshooting.rst:11
msgid "The pairing code should be printed on receipt printers connected to the IoT Box and should also be displayed on connected monitors."
msgstr ""
#: ../../iot/config/pos.rst:94
msgid "Make sure the IoT Box is ready, this is indicated by a brightly lit green status LED just next to the red power status LED. The IoT Box should be ready ~2 minutes after it is started."
#: ../../iot/config/troubleshooting.rst:14
msgid "The pairing code doesn't show under the following circumstances:"
msgstr ""
#: ../../iot/config/pos.rst:98
msgid "Make sure the IoT Box is connected to the same network as your POS device. Both the device and the IoT Box should be visible in the list of connected devices on your network router."
#: ../../iot/config/troubleshooting.rst:16
msgid "The IoT Box is already connected to an Odoo database;"
msgstr ""
#: ../../iot/config/pos.rst:102
msgid "If you specified the IoT Box's IP address in the configuration, make sure it corresponds to the ip address printed on the IoT Box's status receipt."
#: ../../iot/config/troubleshooting.rst:18
msgid "The IoT Box is not connected to the Internet;"
msgstr ""
#: ../../iot/config/pos.rst:106
msgid "Make sure that the POS is not loaded over HTTPS."
#: ../../iot/config/troubleshooting.rst:20
msgid "The code is only valid for 5 minutes after the IoT Box has started. It's automatically removed from connected displays when this delay has expired;"
msgstr ""
#: ../../iot/config/pos.rst:108
msgid "A bug in Firefox's HTTP implementation might prevent the autodiscovery from working reliably. You could also manually set up the IoT Box's IP address in the POS configuration."
#: ../../iot/config/troubleshooting.rst:23
msgid "The version of the IoT Box image is too old. It should use version 20.06 or more recent. If your IoT Box image is from an earlier version, then you will have to reflash the SD card of your IoT Box to update the image (see :doc:`Flashing your SD Card <flash_sdcard>`)"
msgstr ""
#: ../../iot/config/pos.rst:113
msgid "The Barcode Scanner is not working"
#: ../../iot/config/troubleshooting.rst:28
msgid "If you are not in any of the cases listed above, make sure that the IoT Box has correctly started, by checking that a fixed green LED is showing next to the micro-USB port."
msgstr ""
#: ../../iot/config/pos.rst:115
msgid "The barcode scanner must be configured in US QWERTY and emit an Enter after each barcode. This is the default configuration of most barcode readers. Refer to the barcode reader documentation for more information."
#: ../../iot/config/troubleshooting.rst:33
msgid "I've connected my IoT Box but it's not showing in my database"
msgstr ""
#: ../../iot/config/pos.rst:120
msgid "The IoT Box needs a 2A power supply to work with some barcode scanners. If you are not using the provided power supply, make sure the one you use has enough power."
#: ../../iot/config/troubleshooting.rst:35
msgid "When you connect an IoT Box to a database, the IoT Box might restart, if that is the case, it might take up to one minute before appearing in your database. If after some time the IoT is still not showing, make sure that your database can be reached from the IoT Box and that your server doesn't use a multi-database environment."
msgstr ""
#: ../../iot/config/pos.rst:124
msgid "Some barcode scanners will need more than 2A and will not work, or will work unreliably, even with the provided power supply. In those case you can plug the barcode scanner in a self-powered USB hub."
#: ../../iot/config/troubleshooting.rst:42
msgid "My IoT Box is connected to my database, but cannot be reached"
msgstr ""
#: ../../iot/config/pos.rst:129
msgid "Some poorly built barcode scanners do not advertise themselves as barcode scanners but as a usb keyboard instead, and will not be recognized by the IoT Box."
#: ../../iot/config/troubleshooting.rst:44
msgid "Make sure that the IoT Box and the device running the browser are located on the same network as the IoT Box cannot be reached from outside the local network."
msgstr ""
#: ../../iot/config/pos.rst:134
msgid "The Barcode Scanner is not working reliably"
#: ../../iot/config/troubleshooting.rst:49
msgid "Printer"
msgstr ""
#: ../../iot/config/pos.rst:136
msgid "Make sure that no more than one device with 'Scan via Proxy'/'Barcode Scanner' enabled are connected to the IoT Box at the same time."
#: ../../iot/config/troubleshooting.rst:52
msgid "My printer is not detected"
msgstr ""
#: ../../iot/config/pos.rst:140
msgid "Printing the receipt takes too much time"
#: ../../iot/config/troubleshooting.rst:54
msgid "If one of your printers doesn't show up in your devices list, go to the IoT Box homepage and make sure that it is listed under *Printers*."
msgstr ""
#: ../../iot/config/pos.rst:142
msgid "A small delay before the first print is expected, as the IoT Box will do some preprocessing to speed up the next printings. If you suffer delays afterwards it is most likely due to poor network connection between the POS and the IoT Box."
#: ../../iot/config/troubleshooting.rst:60
msgid "If your printer is not present on the IoT Box homepage, hit *Printers Server*, go to the *Administration* tab and click on *Add Printer*. If you can't find your printer in the list, it's probably not connected properly."
msgstr ""
#: ../../iot/config/pos.rst:148
msgid "Some characters are not correctly printed on the receipt"
#: ../../iot/config/troubleshooting.rst:66
msgid "My printer outputs random text"
msgstr ""
#: ../../iot/config/pos.rst:150
msgid "The IoT Box does not support all languages and characters. It currently supports Latin and Cyrillic based scripts, with basic Japanese support."
#: ../../iot/config/troubleshooting.rst:68
msgid "For most printers, the correct driver should be automatically detected and selected. However, in some cases, the automatic detection mechanism might not be enough, and if no driver is found the printer might print random characters."
msgstr ""
#: ../../iot/config/pos.rst:155
msgid "The printer is offline"
#: ../../iot/config/troubleshooting.rst:73
msgid "The solution is to manually select the corresponding driver. On the IoT Box homepage, click on *Printers Server*, go to the *Printers* tab and select the printer in the list. In the Administration dropdown, click on *Modify Printer*. Follow the steps and select the Make and Model corresponding to your printer."
msgstr ""
#: ../../iot/config/pos.rst:157
msgid "Make sure the printer is connected, powered, has enough paper and has its lid closed, and is not reporting an error. If the error persists, please contact support."
#: ../../iot/config/troubleshooting.rst:83
msgid "Epson and Star receipt printers and Zebra label printers do not need a driver to work. Make sure that no driver is selected for those printers."
msgstr ""
#: ../../iot/config/pos.rst:162
#: ../../iot/config/troubleshooting.rst:88
msgid "My Zebra Printer doesn't print anything"
msgstr ""
#: ../../iot/config/troubleshooting.rst:90
msgid "Zebra printers are quite sensitive to the format of the ZPL code that is printed. If nothing comes out of the printer or blank labels are printed, try changing the format of the report that is sent to the printer by accessing :menuselection:`Settings ~~> Technical ~~> Views` in developer mode and look for the corresponding template."
msgstr ""
#: ../../iot/config/troubleshooting.rst:97
msgid "Barcode Scanner"
msgstr ""
#: ../../iot/config/troubleshooting.rst:100
msgid "The characters read by the barcode scanner don't match the barcode"
msgstr ""
#: ../../iot/config/troubleshooting.rst:102
msgid "By default, we assume that your barcode scanner is configured in US QWERTY. This is the default configuration of most barcode readers. If your barcode scanner uses a different layout, please go to the form view of your device and select the correct one."
msgstr ""
#: ../../iot/config/troubleshooting.rst:108
msgid "Nothing happens when a barcode is scanned"
msgstr ""
#: ../../iot/config/troubleshooting.rst:110
msgid "Make sure that the correct device is selected in your Point of Sale configuration and that your barcode is configured to send an ENTER character (keycode 28) at the end of every barcode."
msgstr ""
#: ../../iot/config/troubleshooting.rst:115
msgid "The barcode scanner is detected as a keyboard"
msgstr ""
#: ../../iot/config/troubleshooting.rst:117
msgid "Some poorly built barcode scanners do not advertise themselves as barcode scanners but as a USB keyboard instead, and will not be recognized by the IoT Box."
msgstr ""
#: ../../iot/config/troubleshooting.rst:121
msgid "You can manually change the device type by going to its form view and activating the *Is scanner* option."
msgstr ""
#: ../../iot/config/troubleshooting.rst:128
msgid "Cashdrawer"
msgstr ""
#: ../../iot/config/troubleshooting.rst:131
msgid "The cashdrawer does not open"
msgstr ""
#: ../../iot/config/pos.rst:164
msgid "The cashdrawer should be connected to the printer and should be activated in the POS configuration."
#: ../../iot/config/troubleshooting.rst:133
msgid "The cashdrawer should be connected to the printer and the *Cashdrawer* checkbox should be ticked in the POS configuration."
msgstr ""
#: ../../iot/devices.rst:3
@@ -363,39 +371,31 @@ msgid "Connection"
msgstr ""
#: ../../iot/devices/camera.rst:14
msgid "To connect the camera to the *IoT Box*, simply combine the two by cable."
msgid "To connect the camera to the *IoT Box*, simply connect the two by cable."
msgstr ""
#: ../../iot/devices/camera.rst:18
msgid "In some cases, a serial to USB adapter could be needed."
msgstr ""
#: ../../iot/devices/camera.rst:20
#: ../../iot/devices/camera.rst:17
msgid "If your camera is a `*supported one* <https://www.odoo.com/page/iot-hardware>`__, there is no need to set up anything as it will be detected as soon as it is connected."
msgstr ""
#: ../../iot/devices/camera.rst:27
msgid "In some cases, you could need to restart the box and download your camera’s drivers from the box. To do so, go to your *IoT Box Home Page* and click on *drivers list*. Then, click on load drivers."
msgstr ""
#: ../../iot/devices/camera.rst:35
#: ../../iot/devices/camera.rst:25
msgid "Link a Camera to a Quality Control Point"
msgstr ""
#: ../../iot/devices/camera.rst:38
#: ../../iot/devices/measurement_tool.rst:42
#: ../../iot/devices/camera.rst:28
#: ../../iot/devices/measurement_tool.rst:34
msgid "With the Manufacturing app"
msgstr ""
#: ../../iot/devices/camera.rst:40
#: ../../iot/devices/camera.rst:30
msgid "In your *Quality app*, you can setup the device on a *Quality Control Point*. Go to the *Control Points* menu, under *Quality Control* and open the control point you want to link with the camera."
msgstr ""
#: ../../iot/devices/camera.rst:44
#: ../../iot/devices/camera.rst:34
msgid "Now, you can edit the control point and select the device from the dropdown list. Now, hit save."
msgstr ""
#: ../../iot/devices/camera.rst:50
#: ../../iot/devices/camera.rst:40
msgid "Then, your camera can be used with the picked *Control Point*. During the manufacturing process, reaching the *Quality Control Point* you chose before will allow you to take a picture."
msgstr ""
@@ -408,38 +408,30 @@ msgid "When working, it is always better to have your two hands available. Using
msgstr ""
#: ../../iot/devices/footswitch.rst:8
msgid "In fact, you will be able to go from one screen to another by using your foot and the footswitch. Really convenient, it can be configured in a few steps."
msgid "In fact, you will be able to go from one screen to another and perform actions by using your foot and the footswitch. Really convenient, it can be configured in a few steps."
msgstr ""
#: ../../iot/devices/footswitch.rst:15
msgid "Connecting the footswitch to the *IoT Box* is easy, you just have to combine the two by cable."
msgid "Connecting the footswitch to the *IoT Box* is easy, you just have to connect the two by cable."
msgstr ""
#: ../../iot/devices/footswitch.rst:19
msgid "In some cases, a serial to USB adapter may be needed."
msgstr ""
#: ../../iot/devices/footswitch.rst:21
#: ../../iot/devices/footswitch.rst:18
msgid "If your footswitch is a `supported one <https://www.odoo.com/page/iot-hardware>`__, there is no need to set up anything since it will be automatically detected when connected."
msgstr ""
#: ../../iot/devices/footswitch.rst:28
msgid "If it is not a supported one, you may need to restart the box and download your footswitch’s drivers from the box. To do so, go to the *IoT Box Home Page* and click on *drivers list*. Then, click on load drivers."
msgstr ""
#: ../../iot/devices/footswitch.rst:37
#: ../../iot/devices/footswitch.rst:26
msgid "Link a Footswitch to a Workcenter"
msgstr ""
#: ../../iot/devices/footswitch.rst:39
#: ../../iot/devices/footswitch.rst:28
msgid "To link the footswitch to an action, it needs to be configured on a workcenter. Go to the workcenter you want to use the footswitch in and add the device in the *IoT Triggers* tab. Then, you can link it to an action and also add a key to trigger it."
msgstr ""
#: ../../iot/devices/footswitch.rst:47
#: ../../iot/devices/footswitch.rst:36
msgid "Note that the one that is first in the list will be chosen. So, the order matters! In the picture above, using the footswitch will, for example, automatically skip the current part of the process you work on."
msgstr ""
#: ../../iot/devices/footswitch.rst:52
#: ../../iot/devices/footswitch.rst:41
msgid "When you are on the work order screen, a status button indicates if you are correctly connected to the footswitch."
msgstr ""
@@ -456,38 +448,34 @@ msgid "Connect in USB"
msgstr ""
#: ../../iot/devices/measurement_tool.rst:12
msgid "To add a device connected by USB, just plug the USB cable in the *IoT Box*, restart the Box and the device should appear in your Odoo database."
msgid "To add a device connected by USB, just plug the USB cable in the *IoT Box*, and the device should appear in your Odoo database."
msgstr ""
#: ../../iot/devices/measurement_tool.rst:19
msgid "If the device is not found, make sure the drivers have well been loaded on your IoT Box. For this, connect to the *IoT Box Homepage* and click on load drivers."
msgstr ""
#: ../../iot/devices/measurement_tool.rst:27
msgid "Connect in Bluetooth"
msgstr ""
#: ../../iot/devices/measurement_tool.rst:29
#: ../../iot/devices/measurement_tool.rst:21
msgid "Activate the Bluetooth on your device (see your device manual for further explanation) and the IoT Box will automatically try to connect to the device."
msgstr ""
#: ../../iot/devices/measurement_tool.rst:33
#: ../../iot/devices/measurement_tool.rst:25
msgid "Here is an example of what it should look like:"
msgstr ""
#: ../../iot/devices/measurement_tool.rst:39
#: ../../iot/devices/measurement_tool.rst:31
msgid "Link a measurement tool to a quality control point"
msgstr ""
#: ../../iot/devices/measurement_tool.rst:44
#: ../../iot/devices/measurement_tool.rst:36
msgid "In your *Quality app*, you can setup a device on your *Quality Control Points*. To do so, go to the *Control Points* menu, under *Quality Control* and open the control point to which you want to assign a measurement tool."
msgstr ""
#: ../../iot/devices/measurement_tool.rst:49
#: ../../iot/devices/measurement_tool.rst:41
msgid "Now, you can edit the control point and choose the device from the dropdown list. Then, hit save."
msgstr ""
#: ../../iot/devices/measurement_tool.rst:55
#: ../../iot/devices/measurement_tool.rst:47
msgid "Now, your measurement tool is linked to the chosen *Control Point*. The value, which needs to be changed manually, will be automatically updated while the tool is being used."
msgstr ""
@@ -500,110 +488,98 @@ msgid "When using your *IoT Box* in Odoo, you could need to use a printer. Doing
msgstr ""
#: ../../iot/devices/printer.rst:13
msgid "To connect the printer to the *IoT Box*, you just have to combine the two by cable."
msgid "The IoT Box supports printers connected through USB, network or Bluetooth. `Supported printers <https://www.odoo.com/page/iot-hardware>`__ will be detected automatically and will appear in the *Devices* list of your IoT app."
msgstr ""
#: ../../iot/devices/printer.rst:17
msgid "Sometimes, a serial to USB adapter may be needed."
msgstr ""
#: ../../iot/devices/printer.rst:19
msgid "If your printer is a `supported one <https://www.odoo.com/page/iot-hardware>`__, there is no need to set up anything because it will be automatically detected as soon as it is connected."
msgstr ""
#: ../../iot/devices/printer.rst:24
#: ../../iot/devices/printer.rst:18
msgid "The printer can take up to two minutes to appear in your devices list."
msgstr ""
#: ../../iot/devices/printer.rst:29
msgid "In some cases, you may need to restart the box and download your printer’s drivers from the box. To do so, go to the *IoT Box Home Page* and click on *drivers list*. Then, click on load drivers."
msgstr ""
#: ../../iot/devices/printer.rst:37
#: ../../iot/devices/printer.rst:24
msgid "Link the Printer"
msgstr ""
#: ../../iot/devices/printer.rst:40
#: ../../iot/devices/printer.rst:27
msgid "To Work Orders"
msgstr ""
#: ../../iot/devices/printer.rst:42
#: ../../iot/devices/printer.rst:29
msgid "You can link *Work Orders* to printers via a *Quality Control Point* to print labels for manufactured products."
msgstr ""
#: ../../iot/devices/printer.rst:45
#: ../../iot/devices/printer.rst:32
msgid "To do so, you need to create a *Quality Control Point* from the *Quality* app. Then, you can select the correct manufacturing operation and the work order operation. In type, choose *Print Label* and hit save."
msgstr ""
#: ../../iot/devices/printer.rst:53
#: ../../iot/devices/printer.rst:40
msgid "Now, each time you reach the quality control point for the chosen product, a *Print Label* button will appear."
msgstr ""
#: ../../iot/devices/printer.rst:60
#: ../../iot/devices/printer.rst:47
msgid "To Reports"
msgstr ""
#: ../../iot/devices/printer.rst:62
#: ../../iot/devices/printer.rst:49
msgid "You can also link a type of report to a certain printer. In the *IoT* app, go to the *Devices* menu and select the printer you want to set up."
msgstr ""
#: ../../iot/devices/printer.rst:69
#: ../../iot/devices/printer.rst:56
msgid "Now, go to the *Printer Reports* tab."
msgstr ""
#: ../../iot/devices/printer.rst:74
#: ../../iot/devices/printer.rst:61
msgid "Hit edit and then, click on *Add a line*. In the window that shows up, check all the types of reports that should be linked to this printer. Click on select and save."
msgstr ""
#: ../../iot/devices/printer.rst:81
#: ../../iot/devices/printer.rst:68
msgid "Now, each time you click on *Print* in the control panel, instead of downloading a PDF, it will send it to the selected printer and automatically print it."
msgstr ""
#: ../../iot/devices/printer.rst:86
#: ../../iot/devices/printer.rst:73
msgid "Print Receipts from the PoS"
msgstr ""
#: ../../iot/devices/printer.rst:88
#: ../../iot/devices/printer.rst:75
msgid "You can link a printer to your *Point of Sale* app so you can print receipts directly from your *PoS*."
msgstr ""
#: ../../iot/devices/printer.rst:91
msgid "Doing so is really easy. Go to your *Point of Sale* app and open your *PoS* settings, under *Configuration*. There, click on *Edit* and check the *IoT Box* feature. Then, enable the *Receipt Printer*."
#: ../../iot/devices/printer.rst:78
msgid "Doing so is really easy. Go to your *Point of Sale* app and open your *Point of Sale* settings, under *Configuration*. There, click on *Edit* and check the *IoT Box* feature. Then, choose your *Receipt Printer* from the dropdown."
msgstr ""
#: ../../iot/devices/printer.rst:98
msgid "Now, on your *PoS* view, you will be able to print different kinds of tickets: **receipts**, **sale details** and **bills**."
#: ../../iot/devices/printer.rst:86
msgid "Now, you will be able to print different kinds of tickets from your *POS*: **receipts**, **sale details** and **bills**."
msgstr ""
#: ../../iot/devices/printer.rst:101
msgid "For the receipt, it will be printed once the order is validated. The process is automated when you enable the feature in your *PoS*."
#: ../../iot/devices/printer.rst:89
msgid "Receipts are printed once the order is validated. The process is automated when you enable the feature in your *PoS* configuration."
msgstr ""
#: ../../iot/devices/printer.rst:104
#: ../../iot/devices/printer.rst:92
msgid "Sales details can be printed by clicking on the printer icon on the navbar at the top of the *PoS*. It will print the details of the sales of the current day."
msgstr ""
#: ../../iot/devices/printer.rst:111
msgid "As for the bill, it is only available in restaurant mode. In your restaurant settings, activate bills and a *Bill* button will appear in the left panel. Click on it and it will print the bill."
#: ../../iot/devices/printer.rst:99
msgid "As for the bill, it is only available in restaurant mode. In your restaurant settings, activate *Print Bills* and a *Bill* button will appear in the left panel of the *PoS*."
msgstr ""
#: ../../iot/devices/printer.rst:119
#: ../../iot/devices/printer.rst:107
msgid "Print Orders in the kitchen"
msgstr ""
#: ../../iot/devices/printer.rst:121
#: ../../iot/devices/printer.rst:109
msgid "In restaurant mode, you can send order tickets to the kitchen."
msgstr ""
#: ../../iot/devices/printer.rst:123
#: ../../iot/devices/printer.rst:111
msgid "To do so, go to the *PoS* app and open your *PoS* settings. Then, tick *Order Printer*."
msgstr ""
#: ../../iot/devices/printer.rst:129
msgid "Now, go to the *Printers* menu. Hit create and select the *IoT Box* with all the categories of product that should be printed in the *Printer Product Categories* field."
#: ../../iot/devices/printer.rst:117
msgid "Now, go to the *Printers* menu. Hit create, select the printer from the dropdown and, in the *Printer Product Categories* field, choose all the categories of products that should be printed on this printer."
msgstr ""
#: ../../iot/devices/printer.rst:136
msgid "In the *PoS*, when you add or remove a product from one of the selected categories, the button *Order* will be green. If you click on it, a ticket will be printed."
#: ../../iot/devices/printer.rst:124
msgid "In the *PoS*, when you add or remove a product from one of the selected categories, the button *Order* will be green. If you click on it, the IoT Box will print a receipt on the corresponding printer."
msgstr ""